Z-SG مبدل لودسل به آنالوگ
Strain gauge input module with basic functions
58,067,000 تومان
ویژگی های محصول
Z-SG یک مبدل سیگنال کرنش سنج است. اندازه گیری های انجام شده با استفاده از تکنیک 6 سیم یا 4 سیم از طریق پروتکل سریال Modbus-RTU یا خروجی آنالوگ در دسترس هستند. حساسیت از 1 تا 64mV/V، قابل تنظیم توسط DIP-switch برای مقادیر صحیح، از طریق نرم افزار برای مقادیر واقعی/صحیح با اتصال به دستگاه از طریق پورت microUSB در پنل جلویی. نشانگر وزن پایدار از طریق رجیستر Modbus/خروجی دیجیتال. نوشتن از راه دور تار در حافظه فرار و/یا غیر فرار توسط دستورات ورودی دیجیتال/رجیستر مدباس/مدباس. Z-PC-DINAL2-17.5، Z-PC-DIN2-17.5، و Z-PC-DIN8-17.5 لوازم جانبی اجباری برای پیکربندی های ModBUS هستند.
TECHNICAL DATA
| Power supply | 10..40 Vdc, 19..28 Vac (@50..60 Hz) |
| Power consumption | 2,5 W |
| Insulation | 1.500 Vac a 3 vie |
| Accuracy class | 0,01% |
| Status LED | Power supply Error Tx Data Rx Data |
| Connections | Removable screw terminals for conductors up to 2.5 mm² MicroUSB port on front panel |
| Interfaces | RS485 2 wires, speed up to 115.200 bps |
| Supported protocols | ModBUS RTU slave |
| Input channels | 1 analog channel for reading (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gauge load cells, 4 or 6-wire connection, equivalent impedance 87 Ω 1DI tare calibration or weight threshold |
| Output channels | 1 analog retransmission channel of the net weight in current (0…20, 4…20 mA) or in voltage (0..5, 0..10 V); 1DO tare calibration or weight threshold |
| Measurement / Diagnostics | Sensitivity from 1 to 64 mV/V |
| Resolution | 24 bit |
| Thermal drift | 25 ppm/K |
| Data | EEPROM for configuration parameters, retention time 40 years |
| Programming | Plug&Play configurator (EASY SETUP) System software (Z-NET4) DIP-switch |
| Protection degree | IP20 |
| Mounting | For DIN rail guide 35 mm DIN 46277 |
| Operating temperature | -10..+65°C |
| Dimension (WxHxD) | 17,5x100x112 mm |
| Weight | about 140 g |
| Housing | Nylon 6 preloaded 30% glass fibre, self-extinguishing class V0 |
| Standards | CE |
| Norms | EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742, IEC 61131 |
SHIPPING AND EXPORT INFORMATION
| PRODUCT CODE | Z-SG |
| GROSS WEIGHT kg | 0.18 |
| ORIGIN | IT |
| CN (Combined Nomenclature) | 85389091 |
| ECCN | 5A991 |
Manuals, flyers
– en ––––
– en ––––
––––– ru
Tools
DRAWINGS & CAD MODELS
Certifications
Accessories
USB cable plug USB-A – MicroUSB-B – 5P
Load cell connection and equalization system
Mandatory accessory if you need ModBUS communication
Head terminal + 2 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection
2 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection
8 slot 17.5mm DIN rail bus system for Z-PC Line I/O fast mounting and connection
Alternative products
Strain gauge input module with advanced features
Suite for all programmable SENECA devices
Android mobile version of the EASY Setup suite for Windows PC
If you add to your cart many items of the same product you’re going to get a discount based on the table below:
| Quantity, equal or more than: | Discount |
| 1 | 5% |
| 7 | 10% |
| 11 | 15% |
√ Product added to your basket
| ‹ Add other products |
| Proceed to Checkout › |
ATTENTION! This product requires a mandatory accessory for the power supply. If you have not already done so, please add it to your cart before proceeding with your order. Thank you
Notify me when available
I would like to be notified when the product is available at the following e-mail address:
Product versions
Mandatory accessory
Accessories
If you add to your cart many items of the same product you’re going to get a discount based on the table below:
| Quantity, equal or more than: | Discount |
| 1 | 5% |
| 7 | 10% |
| 11 | 15% |
√ Product added to your basket
| ‹ Add other products |
| Proceed to Checkout › |
WARNING! If you intend to use ModBUS communication, you will need to purchase a mandatory DIN rail power accessory. Add it to your cart before ordering. Thank you
Product versions
Mandatory accessory if you need ModBUS communication
Accessories
SG-EQ4
Equalization and connection circuit up to 4 load cell in parallel (card only, no box)
Limited quantity available ?
SG-EQ4-BOXPG7
Equalization and connection circuit up to 4 load cell in parallel + IP66 BOX (cable glands and hole covers included)
Availability to confirm, please contact us ?
برای فرستادن دیدگاه، باید وارد شده باشید.
محصولات پیشنهادی

نقد و بررسیها
هنوز بررسیای ثبت نشده است.